Image Mode Selection - Sanyo PLC-WL2503 Owner's Manual

Select the desired image mode among Dynamic, Standard,
Real, Blackboard (Green), Colorboard, Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
select and then press the Point
button.
2
Use the Point
and then press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard (Green)
For the image projected on a blackboard.
This mode helps enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
Press the Point
Point buttons to switch the desired item (Red, Blue,
▲▼
yellow, Green) and then press the SELECT button.
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
Image 1- 4
For viewing with the user preset image mode in the Image
adjust Menu (see pages 34-35).
Downloaded From projector-manual.com Sanyo Manuals

Image Mode Selection

Direct Operation
Menu Operation
buttons to select Image
▲▼
or the SELECT
►
buttons to select the desired item
▲▼
button at Colorboard, and then use the
►
HDMI
Remote Control
ASPECT
IMAGE button
Image Select Menu
Computer Input
IMAGE button
Dynamic
Standard
Real
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 3
Image 4
33