Operation Requirements - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Basic Serial Command Specifications

6.4 Operation Requirements

The Functional Execution Commands are limited, when the projector is in the status below.
(The Status Read Commands are available in following status.)
Projector Status
In Standby status
Cooling Down in process due to abnormal
temperature
Abnormal Temperature Status
Abnormal Power Status
On switching modes
Note) In the above status, the projector returns [ACK] [CR] even if it projector receives other
commands.
Available Functional Execution Commands
C00: POWER ON
NONE (No Execution)
NONE (No Execution)
NONE (No Execution)
NONE (No Execution)
8 / 17