Pointer Up Command; Pointer Down Command; Enter Command; Freeze On Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Basic Serial Command Specifications
6.32

POINTER UP Command

COMMAND "C3C" [CR]
Move up Pointer of OSD Menu.
Detail
The behavior is the same as "▲" button of remote control.
Acceptable
Response
Unacceptable
6.33

POINTER DOWN Command

COMMAND "C3D" [CR]
Move down Pointer of OSD Menu.
Detail
The behavior is the same as the "▼"key of the remote control.
Acceptable
Response
Unacceptable

6.34 ENTER Command

COMMAND "C3F" [CR]
Detail Behave the same as the "ENTER" key of the remote control.
Acceptable
Response
Unacceptable
6.35

FREEZE ON Command

COMMAND "C43" [CR]
Freeze the projecting image.
The behavior is the same as "FREEZE" button of the remote control except the
Detail
command only freezes the image and does not cancel it.
The projector shows the OSD "Freeze" at receiving the command.
Acceptable
Response
Unacceptable
6.36

FREEZE OFF Command

COMMAND "C44" [CR]
Cancel Freeze function
The behavior is the same as "FREEZE" button of the remote control except the
Detail
command only cancels the freeze and does not freezes the image.
The projector shows the OSD "Freeze" at receiving command.
Acceptable
Response
Unacceptable
6.37

AUTO ADJ. Command

COMMAND "C89" [CR]
AUTO ADJ. Command
Detail The behavior is the same as the key "AUTO ADJ." button of the remote control.
The projector does not show any OSD at receiving the command.
Acceptable
Response
Unacceptable
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
14 / 17