Changing The Aspect Ratio Of The Projected Image - Casio XJ-H2600 User Manual

Changing the Aspect Ratio of the Projected Image

Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image.
Available settings depend on your projector model as shown below. For details about the meaning of
each setting, see "Aspect Ratio" (page 41) under "Screen Settings Main Menu".
XJ-H2600/XJ-H2650
Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as
shown below.
Input Source
Video, S-video, Component, HDMI (DTV)
RGB, HDMI (PC)
XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750/XJ-ST145/XJ-ST155
Pressing the [ASPECT] key will toggle between settings in accordance with the current input source as
shown below.
Input Source
Video, S-video, Component, HDMI (DTV)
RGB, HDMI (PC)
Note
For details about how the aspect ratio setting affects the projected image, see "Aspect Ratio
Setting and Projection Image" (page 60).
You also can change the aspect ratio setting using the setup menu. For details, see "Aspect
Ratio" (page 41) under "Screen Settings Main Menu".
Important!
Note that enlarging or reducing the size of an image using the [ASPECT] key for commercial
purposes or public presentation may infringe on the legally protected copyright of the copyright
holder of the original material.
Pressing [ASPECT] will cycle through these settings:
Normal 16:9 4:3
Normal Full 4:3 True
Pressing [ASPECT] will toggle between these settings:
Normal 16:9
Normal Full
23
Letter Box