Casio XJ-H2600 User Manual page 68

Group Item
Image Input
3D
Color mode
Blank
Aspect ratio
Brightness
Contrast
Eco Mode
Audio Volume
Mute
Audio Output
Factory Defaults (Button)
Specifies the input source. The following are the available input source
options.
3D Off
Computer 1/2 (Auto)
Computer 1/2 (RGB)
Computer 1/2 (Component)
Video
S-video
HDMI
USB
Puts the projector into the 3D input mode or normal input mode.
On: 3D input mode
Off: Normal input mode
Note that this setting cannot be change while the currently selected
input source is "Computer 1 (Component)", "Computer 2
(Component)", "HDMI", or "USB".
Specifies the color mode.
For details about this setting, see "Selecting the Color Mode" (page
20).
Selecting "On" for this setting temporarily blocks the image from the input
source. "Off" causes the image from the input source to be projected.
The operation of this item is identical to that of the remote controller's
[BLANK] key. For details, see "Momentarily Blanking the Image and
Muting the Audio" (page 21).
Changes the aspect ratio of the projected image.
For details about this setting, see "Changing the Aspect Ratio of the
Projected Image" (page 23).
This corresponds to the "Image Adjustment 1
setup menu. Input a value into the box and then click the [Apply] button.
This will change the projector's "Brightness" setting accordingly.
This corresponds to the "Image Adjustment 1
setup menu. Input a value into the box and then click the [Apply] button.
This will change the projector's "Contrast" setting accordingly.
Switches the Eco mode.
For details about this setting, see "Eco Mode (Power Saving, Low
Noise)" (page 25).
Input a value into the box and then click the [Apply] button. This will
change the volume setting accordingly.
Specifies the mute setting. Audio is output while "Off" is selected for this
setting, and muted when "On" is selected.
Specifies either output from the projector's speaker output or AUDIO OUT
terminal for audio.
Speaker: Audio output from the speaker
Line: Audio output from the AUDIO OUT terminal
Clicking to return all Network Projection Control items, except for the
"Projector status" item, to their initial factory defaults.
68
Description
3D On
Computer 1/2 (RGB)
Video
S-video
Brightness" setting of the
Contrast" setting of the