Casio XJ-H2600 User Manual page 34

8.
After entering the new password, press the [ENTER] key.
This will display a dialog box prompting you to enter the same password again.
9.
Re-enter the same password key sequence you entered in step 7 and then press
the [ENTER] key.
The message "Your new password has been registered." indicates that the password has
been changed. Press the [ESC] key.
If the password you entered in this step is different from the one you entered in step 7, the
message "The password you input is wrong." appears. Press the [ESC] key to return to step 7.
To change the power on password setting
1.
Perform steps 1 through 5 under "To change the password" (page 33) and
display the Password protection screen.
2.
After confirming that "Power On Password" is selected, use the [ ] and [ ] keys
to select either the "On" or "Off" setting.
Changing the setting from "Off" to "On" will cause the "Prompt for password when power is
turned on?" dialog box to appear. Press the [ENTER] key to confirm that you want to turn on
power on password protection, or [ESC] to exit the dialog box without changing the setting.
3.
After you are finished, press the [MENU] key to exit the setup menu.
To change the custom logo capture password setting
1.
Perform steps 1 through 5 under "To change the password" (page 33) and
display the Password protection screen.
2.
Press the [ ] key to select "Logo Password".
3.
Use the [ ] and [ ] keys to select "On" or "Off".
Changing the setting from "Off" to "On" will cause the "Require password verification before
custom logo capture?" dialog box to appear. Press the [ENTER] key to confirm that you want
to turn on custom logo password protection, or [ESC] to exit the dialog box without changing
the setting.
4.
After you are finished, press the [MENU] key to exit the setup menu.
34