Using The Remote Start; Before Using Your Remote Start; Remote Starting Your Vehicle - Directed Electronics VIPER 5701 Owner's Manual

Switch has been programmed to a new number of presses by your
authorized dealer, that number should be indicated below.
Add here:
Override Switch Number ___________

Using the remote start

Before using your Remote Start

Read this user guide, including the warnings on page 24 .
Ensure that the vehicle is parked in the open air and not in a garage.
To use your remote start to pre-warm or pre-cool your vehicle, remem-
ber to set the climate controls to the desired settings before shutting
off the engine.

Remote starting your vehicle

▀
Press the
lights flash.
▀
On the 2-way remote, the Remote Start indicator blinks and ascend-
ing
Remote Start tone plays.
The preset remote start run time is 12 minutes. This can be changed to
between 12 and 60 minutes (see your authorized dealer for program-
ming changes).
Your system has a feature (if programmed on) that will automatically
notify you when the run time is running low. When 9 minutes (of the
12 minute default) runtime has elapsed, the system sends the 2-way
remote control a paging signal. The 2-way remote beep once, plays
© 2008 Directed Electronics—all rights reserved
button on the remote control. The vehicle parking