Transmitter Configuration - Directed Electronics VIPER 5701 Owner's Manual

Transmitter configuration

Level
Button
LOCK
UNLOCK
REMOTE START
AUX
FUNCTION
Note:
Button Command
Press one time to Arm
Arm
Press one time to
Disarm
Disarm
Press one time to acti-
vate Remote Start
Remote
A U X
Start
Press and hold for 1.5
A U X
seconds to activate the
AUX
Trunk Release.
Press 1 to 4 times.
( See Function shift
Function
table.)
Shift
Pressing more than one button simultaneously generates an Error tone and the F-Shift
LED turns ON .
© 2008 Directed Electronics—all rights reserved
REMOTE CONTROL FUNCTIONS TABLE
x 0 x 1
SILENT
ARM
ARM
SILENT
DISARM
DISARM
REMOTE RUNTIME
START RESET
TRUNK
AUX 1
RELEASE
CABIN
FUNCTION TEMPERATURE
SHIFT REQUEST
(2-way Only)
button must be pressed and finally held to access state.
Confirmation Feedback
(2-way remote only)
Lock LED blink for one
2
second with 1 Beep and
siren tone
3
Unlock LED blink for one
second with 2 Beeps
4
Remote start LED blinks
for 3 seconds, Remote
5
Start tones.
The AUX LED comes on
6
for 3 seconds, and AUX
activation tone sounds.
LED indicators turn on
(according to the feature
command.)
x 2 x 3
ARMED
SENSOR
(SILENT
BYPASS
SENSOR)
VALET MODE CAR FINDER
TIMER MODE SMART START
AUX 2 AUX 3
RUNTIME
ARM STATUS
CHECK
(2-way Only)
(2-way Only)
Press/hold for 1.5 seconds
to Arm the system and then
activate the Panic output
This is an optional
feature. See your sales
rep/installer for details.
Each Press then release,
shifts the function of the
command button.
x 4
ARMED
(SILENT
TRIGGER)
—
REAR
DEFOGGER
—
LAST
TRIGGER
REQUEST
(2-way Only)
Notes