None Key - Aastra 55I IP PHONE - RELEASE 2.1 User Manual

None Key

You can set a key to force a blank entry on the IP phone display for a specific key.
You do this by setting the key to "none". The keys are added in order (from key1 to
key20) after any hard-coded keys have been added. If a particular key is not defined,
it is ignored. For more infomration about key behavior, see
on page 58.
Setting a None Key
Aastra Web UI
Use the following procedure to configure a None key on the 55i IP Phone. The
procedure shows the softkey screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>..
2. For softkeys, select from "Key 1" through "Key 20".
or
For programmable keys, select from "Key 1" through "Key 6".
3. In the "Type" field, select None.
4. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
5. Click
106 Model 55i IP Phone User Guide
to save your changes.
"Key Display Behavior"