Setting Services Key
Aastra Web UI
Use the following procedure to configure a Services key on the 55i IP Phone. The
procedure shows the programmable key screen as an example.
Note: By default, Key 1 on the top set of programmable keys is configured for
Services.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
2. For softkeys, select from "Key 1" through "Key 20".
or
For programmable keys, select from "Key 1" through "Key 6".
3. In the "Type" field, select Services.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Line" field, select the line you want to apply to this key. Valid values are 1
through 9.
6. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
7. Click
to save your changes.
Model 55i IP Phone User Guide
99