Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - ADAPTIVE LOG EXPORTER REV1 Manual page 38

36 M D
ANAGING ESTINATIONS
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
For the destination type to which you wish to add a new device, use the
right-mouse button (right-click) on the destination name and select Add
Destination.
A new destination appears below the main destination name and configuration
options appear. For example, if you add a new destination to the Syslog UDP
destination, the following window appears:
In the Basic Configuration area, enter values for the parameters:
Name — Specify the name you wish to assign this destination, composed only
•
of alphanumeric characters and the underscore (_).
• Description — Specify a description for this device.
Click the arrow next to Advanced Configuration to reveal the configuration
parameters.
For the Number of Threads parameter, specify the number of concurrent
processing threads you wish run in this destination. The default is 1.
Choose one of the following options:
If you are configuring a Syslog UDP destination:
a
- Syslog Server Address — Specify the IP address of your STRM system.
- Syslog Server Port — Specify the syslog port on your STRM system.
If you are configuring a Logger destination:
b
- Logger Prefix — Specify the heading you wish to assign to the logs. The
Logger Prefix entry must start with Device.Events and may contain letters,
numbers and periods.
- Prepend Syslog Header — Select the check box if you wish the syslog
header to be attached to the message in the logs.
From the menu, select File > Save.
Repeat for each destination you wish to configure.
STRM Adaptive Log Exporter