Page 1
insert batteries: Screw Lens Stop Unfasten screw with a Phillips or Flat head screwdriver.
Page 2
Stop While pushing down on the "stop," grip the lens cap and turn counterclockwise. Pushing down on the "stop" will allow lens to be unlocked. Once the batteries are placed inside the compartment and the lens cap is sealed, make sure to align the holes in both the lens cap and flashlight body and fully tighten the screw.
Page 3
2 AA batteries are required. (Not i ncluded) iaerx A) Insert batteries as illustrated. B) To remove batteries push levers to release the batteries from compartment.
Page 4
CAUTION: Do not mix old and new batteries. Do not alkaline standard or rechargeable batteries. Do not dispose of this product in fire as batteries inside product may explode or leak. Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the toy before being charged.
Need help?
Do you have a question about the 6336 and is the answer not in the manual?
Questions and answers