Basic Fax Operation; Fax Operations - Konica Minolta bizhub C25 Quick Manual

Fax operations

d
For details, refer to the Facsimile User's Guide.

Basic fax operation

This section contains information on the general operation for faxing.
1
Press the Fax key to enter Fax mode.
2
Place the document in the ADF or on the original glass.
3
Specify the desired scan settings.
4
Specify the destination.
–
If fax numbers have already been registered, a registered destination can be selected.
–
When directly entering the fax number, use the keypad to type in the number.
–
A document can be sent to multiple destinations at the same time (broadcast transmission).
5
Press the Start key.
After all document pages have been scanned, the fax is sent
–
The fax is sent in black and white regardless of whether the Start (Color) key or the Start (B&W) key is
pressed.
–
To scan multiple pages from the original glass, [NEXT PAGE?] appears in the message window. Place
the second document page on the original glass, and then press the Select key.
–
If the Stop/Reset key is pressed while copying, [JOB CANCEL] appears in the message window. To
stop copying, select [YES]. To continue copying, select [NO].
6-2 Fax operations