Snmp - Kyocera FS-1120D User Manual

Device Settings
3
4

SNMP

SNMPv3 Options
2-5
In the Administrator Settings dialog box, clear the Password protect
administrator settings check box.
Click OK.
Simple Network Management Protocol (SNMP) is a set of rules that govern the
management of network devices, such as printing systems. SNMP settings
determine the level of security when using the Auto Configure feature, and
prevent unauthorized printing to the SNMPv3 printing system. SNMP settings
must be set in the printer driver and in the printing system's Command Center.
The following SNMP options are available:
SNMPv1/v2c
This option ensures successful Auto Configure communication using Read
community name and Write community name.
SNMPv3
This option ensures secure Auto Configure communication using a user
name and password. Authentication and privacy options are available by
selecting Settings.
Apply to other models
This option displays a list of installed printing systems to apply the selected
SNMP settings.
You can select SNMPv3 options for secure communication with the printing
system.
SNMPv3 is enabled when an optional IB-23 network card is installed. These
settings must match the IB-23 settings. IB-23 has settings for both an
authentication password and an encryption password, but they must both match
the driver password.
Authentication
This option provides an algorithm to check that a transferred file has arrived
intact. Message Digest 5 (MD5) and Secure Hash Algorithm 1 (SHA1) are
hash algorithms used to authenticate packet data.
MD5
This option provides a cryptographic hash function with a 128–bit hash
value. It adds security and protection against Gateway Load Balancing
Protocol (GLBP)-spoofing software.
SHA1
This option produces a message digest that is 160 bits long. SHA1 is the
successor to MD5.
Privacy
This option uses encryption for secure communication. It is available after
you select the Authentication option. You may select one privacy option.
(IB-23 does not support AES encrypted communication.)
DES
This option uses the Data Encryption Standard for encryption. DES turns
cleartext into ciphertext via an encryption algorithm. It encrypts and decrypts
data using 8-byte blocks and a 56-bit key.
User Guide