Optimization Settings; Halftone Screen - Kyocera FS-1120D User Manual

Imaging

Optimization Settings

Halftone Screen

Setting the Halftone Screen
1
2
3
6-5
In the Imaging tab, click Graphics to open the Graphics settings dialog box
and access the Inversion options. The settings are available when KPDL is
selected as the PDL.
Reverse image
This setting prints images like a photo negative, reversing black and white
areas of the image.
Mirror print
This setting prints the page content backwards, as it would appear in a mirror
image.
Optimization is a process or methodology of improving a printing system's
function or effectiveness.
In the Imaging tab, click Graphics to open the Graphics settings dialog box
and access the Optimization settings. The settings are available when KPDL is
selected as the PDL.
Fast printing
This setting increases print speed and decreases spool size. It delivers
images in binary format. It can be used for most everyday printing needs.
Document portability
This setting creates a PostScript file in ASCII text encoding. Unlike the binary
format created in Fast printing, the ASCII text created with this selection
can be edited.
Halftone Screen lets an experienced user print different shades of gray as are
found in photographs. Shades are produced by printing dots of various sizes
and shapes, and by spacing them closer or farther apart. Shading can also be
adjusted by the number of rows of data, the angle of the rows, and the shape of
the data.
Halftone Screen is available when KPDL is selected as the PDL. It is
unavailable if GDI compatible mode is selected in the PDL Settings dialog
box.
Halftone Screen provides a means to apply shades of gray to black and white
printed output.
In the Imaging tab, click Graphics > Halftone Screen.
Clear the Use printer's default screens check box.
Set the available options to the desired values:
Ink
Lists the halftone screens available. For black and white printers, this option
appears unavailable and is permanently set to Black.
Frequency
Displays the number of rows of dots per inch or centimeter. Set the range
from 2.0 to 999.9, and select lines/inch or lines/cm.
User Guide