Table of Contents
Advertisement
Aligning the Print Head Position
>
Maintenance
Advanced Guide
Aligning the Print Head Position
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
This printer supports two head alignment methods: automatic head alignment and manual head
alignment. Normally, the printer is set for automatic head alignment.
If the printing results are unsatisfactory even after you execute automatic head alignment, see "
," and execute manual head alignment. To change to the manual head
the Print Head Manually
alignment, click Custom Settings on the Maintenance tab, and then check the Align heads manually
check box.
The procedure for performing print head alignment is as follows:
Print Head Alignment
Open the
printer driver setup window
1.
Click Print Head Alignment on the Maintenance tab
2.
The Start Print Head Alignment dialog box opens.
Load paper in the printer
3.
Load a sheet of A4 size or Letter size Matte Photo Paper (MP-101) into the rear tray.
Note
The type of media and number of sheets to be used differ if you select the manual head
alignment.
Execute head alignment
4.
Make sure that the printer is on and click Align Print Head.
Follow the instruction in the message.
Note
To check the current setting before you adjust the print head position, click Print Alignment
Value.
>
Performing Maintenance from a Computer
> Aligning the Print Head Position
Стр. 299 из 396 стр.
Aligning
Page top
Advertisement
Table of Contents
