Table of Contents
Advertisement
Tips on How to Use Your Printer
If you press the Power button to turn off the power, the printer caps the Print Head (nozzles)
automatically to prevent from drying. If you unplug the power cord from the wall outlet or turn off
the extender cable connector before the Power lamp is turned off, the Print Head will not be
capped properly and this will cause drying or clogging.
To unplug the power cord, be sure to follow this procedure.
Print periodically!
Just as the tip of a felt pen becomes dry and unusable if it has not been used for a long time,
even if it is capped, the Print Head too, may become dried or clogged if the printer has not been
used for a long time.
We recommend the printer to be used at least once a month.
Note
Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen
or paint-stick, or bleed if water or sweat comes in contact with the printed area.
Does the printer need to be handled with care when using or
transporting?
Tip!: Do not use or transport the printer vertically or slanted!
If the printer is used or transported vertically or slanted, the printer may become damaged or ink may
leak from the printer.
Be sure not to use or transport the printer vertically or slanted.
Lamp on the printer is flashing: What can I do?
Alarm lamp is flashing orange.
(A)
lamp flashes
Alarm
(B) Alarm lamp is off
(C) Alarm lamp flashes repeatedly
→Your printer has an error. Refer to the "
Guide , then resolve the error.
Power lamp flashes green once and Alarm lamp flashes orange once
alternately.
→An error that requires repair has occurred. Contact your Canon service representative.
Colors are uneven, and print results are blurred.
Troubleshooting
" in the on-screen manual: Advanced
Стр. 76 из 396 стр.
Advertisement
Table of Contents
