Table of Contents
Advertisement
Setting the Stapling Margin
>
Printing from a Computer
Advanced Guide
Setting the Stapling Margin
Setting the Stapling Margin
The procedure for setting the stapling direction and the width of the stapling margin is as follows:
Open the
printer driver setup window
1.
Specify the side to be stapled
2.
Check the position of the stapling margin from Staple Side on the Page Setup tab.
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
staple position. If you want to change the setting, select from the list.
Set the margin width
3.
If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK.
Complete the setup
4.
Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified staple side and margin.
Important
Staple Side and Specify Margin... appear grayed out and are unavailable when:
>
Printing with Other Application Software
Стр. 200 из 396 стр.
>
>
Various Printing Methods
Advertisement
Table of Contents
