NETGEAR XSM7224S - ProSafe 10 Gigabit Stackable Hardware Installation Manual page 25

Managed Stackable Switch XSM7224S
Table 1. Technical Specifications (Continued)
Feature
Bandwidth
Address database size
10/100/1000 buffer
memory
Mean time between
failure (MTBF)
Performance
Power consumption
Dimensions (W x D x H) 17.32 x 16.92 x 1.7 inch (440 x 430 x 43 mm)
Environment
Electromagnetic
emissions and immunity
Safety
XSM7224S
480 Gbps
32K MAC addresses per system
Max support 2-MB buffer memory
180,178 hours @ 25°C
68,419 hours @ 55° C
•
Forwarding modes: Store-and-forward
•
Network latency:
- Less than 80 microseconds for 64-byte frames in store-and-forward mode
for 10 Mbps to 100 Mbps transmission
- 3.245 us for 64-byte frames for 1000 Mbps to 1000 Mbps transmission
- 1.59 us for 64-byte frames for 10G to 10G transmission
• Addressing: 48-bit MAC address
•
Acoustic noise: (ANSI-S10.12): <60 dB @ 25°C ambient temperature
•
Heat dissipation: 666.42 Btu/hr
300 W maximum 100–240VAC, 50 –60
PoE output 384W
Operating:
•
Temperature: 32° to 122°F (0° to 50°C)
•
Humidity: 90% maximum relative humidity, noncondensing
•
Altitude: 10,000 ft (3,000 m) maximum
Storage:
•
Temperature: – 4° to 158°F (–20° to 70°C)
•
Humidity: 95% maximum relative humidity, noncondensing
•
Altitude: 10,000 ft (3,000 m) maximum
CE mark, commercial, FCC Part 15 Class A, VCCI Class A, Class A EN 55022
(CISPR 22) Class A, Class A C-Tick , EN 50082-1, EN 55024
CE mark, commercial, CSA certified (CSA 22.2 #950), UL listed (UL 1950)/cUL
IEC950/EN60950
Hz universal input when
Appendix A. Technical Specifications | 25