Unpacking And Installing The Junos Xml Protocol Perl Client Prerequisites; Package - Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Manual

Junos 10.3 Junos XML Management Protocol Guide
Unpacking and Installing the Junos XML Protocol Perl Client Prerequisites Package
208
% which perl
% perl -v
If the issued output indicates that Perl is not installed or the version is older than the
required version, you need to download and install the Perl source package located at
http://www.cpan.org/src/stable.tar.gz
After installing a suitable version of Perl, unpack and install the prerequisites package.
Then install the Junos XML protocol Perl client application. These procedures are detailed
in the following sections:

Unpacking and Installing the Junos XML Protocol Perl Client Prerequisites

Package on page 208
Installing the Junos XML Protocol Perl Client on page 209
For additional information, consult the
distribution. It is located in the
The prerequisites package consists of C libraries, executables, and Perl modules. It must
be installed on the client machine for the Junos XML protocol Perl client and the included
examples to work correctly. To uncompress and unpack the gzip tar archive containing
the prerequisite files, perform the following steps:
Move the downloaded prerequisites package into the
1.
parent-directory/junoscript-perl-release/
"Unpacking the Junos XML Protocol Perl Client and Sample Scripts" on page 207. The
gzip tar archive containing the prerequisite files must be uncompressed, unpacked,
and installed in this directory.
Issue the following command to uncompress and unpack the package:
2.
On FreeBSD and Linux systems:
% tar zxf junoscript-perl-prereqs-release-type.tar.gz
On Solaris systems:
% gzip -dc junoscript-perl-prereqs-release-type.tar.gz | tar xf
where is the release code (e.g.
release
command creates a directory called
it.
By default, the prerequisite Perl modules are installed in the standard directory. The
standard directory is normally
standard directory. You can opt to install the modules in a private directory.
To install the required modules in the standard directory:
Go to the
1. parent-directory/junoscript-perl-release
prerequisites package.
Issue the following command:
2.
.
file that is included with the client
README
parent-directory/junoscript-perl-release/
directory that was created in Step 2 of
) and is
10.3R1.1 type
and writes the contents of the package to
prereqs/
. You need root privileges to access the
/usr/local/lib/
directory where you unpacked the
Copyright © 2010, Juniper Networks, Inc.
directory.
or . This
domestic export