Audience - Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Manual

Junos 10.3 Junos XML Management Protocol Guide

Audience

xviii
configure or request information from the Junos XML protocol server on a device running
Junos OS.
NOTE: For additional information about Junos OS—either corrections to or information
that might have been omitted from this guide—see the software release notes at
.
http://www.juniper.net/
This guide is designed for network administrators who are configuring and monitoring a
Juniper Networks M Series, MX Series, T Series, EX Series, or J Series router or switch.
This guide is designed for Juniper Networks customers who want to write custom
applications for configuring or monitoring a Juniper Networks device that runs the Junos
OS. It assumes that you are familiar with basic terminology and concepts of XML, with
XML-parsing utilities such as the Document Object Model (DOM) or Simple API for XML
(SAX), and with the Junos OS command-line interface (CLI).
To use this guide, you need a broad understanding of networks in general, the Internet
in particular, networking principles, and network configuration. You must also be familiar
with one or more of the following Internet routing protocols:
Border Gateway Protocol (BGP)
Distance Vector Multicast Routing Protocol (DVMRP)
Intermediate System-to-Intermediate System (IS-IS)
Internet Control Message Protocol (ICMP) device discovery
Internet Group Management Protocol (IGMP)
Multiprotocol Label Switching (MPLS)
Open Shortest Path First (OSPF)
Protocol-Independent Multicast (PIM)
Resource Reservation Protocol (RSVP)
Routing Information Protocol (RIP)
Simple Network Management Protocol (SNMP)
Personnel operating the equipment must be trained and competent; must not conduct
themselves in a careless, willfully negligent, or hostile manner; and must abide by the
instructions provided by the documentation.
Copyright © 2010, Juniper Networks, Inc.