Juniper JUNOS OS 10.3 - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Manual page 179

Chapter 7: Summary of Junos XML Protocol Tag Elements
To copy the candidate configuration stored on the local Routing Engine to the other
Routing Engine, verify the candidate's syntactic correctness, and commit it
immediately on both Routing Engines, enclose the tag in the
<synchronize/>
tag element.
<commit-configuration>
To copy the candidate configuration stored on the local Routing Engine to the other
Routing Engine, verify the candidate's syntactic correctness, and commit it on both
Routing Engines at a defined future time, enclose the or
<synchronize/>
tag and tag element in the
<force-synchronize/> <at-time> <commit-configuration>
tag element. Set the value in the <at-time> tag element as previously described for
use of the tag element alone.
<at-time>
To copy the candidate configuration stored on the local Routing Engine to the other
Routing Engine and verify the candidate's syntactic correctness on each Routing
Engine, enclose the or and tag
<synchronize/> <force-synchronize/> <check/>
elements in the tag element.
<commit-configuration>
To copy the candidate configuration stored on the local Routing Engine to the other
Routing Engine, verify the candidate's syntactic correctness, and commit it on both
Routing Engines but require confirmation, enclose the tag and
<synchronize/>
tag elements, and optionally the tag element, in
<confirmed/> <confirm-timeout>
the <commit-configuration> tag element. Set the value in the <confirm-timeout>
tag element as previously described for use of the tag and
<confirmed/>
tag element alone.
<confirm-timeout>
To force the same synchronized commit operation as invoked by the
<synchronize/>
tag to succeed, even if there are open configuration sessions or uncommitted
configuration changes on the remote machine, enclose the
<force-synchronize/>
tag in the <commit-configuration> tag element.
Copyright © 2010, Juniper Networks, Inc. 157