OneTouch ULTRAMINI Owner's Booklet page 10

to the hour and changes when you pass 12:00. When the correct hour appears on the
display, wait five seconds. Your entry will be saved and you will move to the next setting.
Check AM/PM. If not correct, continue to press ▲ or ▼ until the hour and "AM" or
"PM" are correct.
You can ONLY change "AM" and "PM" when you
pass 12:00. Make sure "AM" or "PM" is correct
while you are setting the hour.
The minutes will now start flashing.
Step 3
Set the minutes
Press ▲ or ▼ to change the minutes. When you have
the correct minutes on the display, wait five seconds
to move to the next setting.
The year (last two digits only), month and day appear on the display and the year flashes.
Step 4
Set the year
Press ▲ or ▼ to change the year. When you have the
correct year on the display, wait five seconds to move
to the next setting. The month will now start flashing.
5