Configuring The Core Agent - FARONICS CORE Manual

Configuring the Core Agent

The Core Agent settings can be changed from Core Console following a Core Agent deployment.
Right-click the workstation, select [Core_Server_Name]>Configure Workstation > Configure
Core Agent. Modify the required settings in the following dialog:
The Core Agent configuration consists of the following:
— Event Reporting Connection — This field displays the server to which the workstation
— Core Server Connection — This field displays the port on which the Core Agent listens. The
— Wake-on LAN Across Subnets — Select this check box if the workstation will act as a
— Network Traffic Management — Select the Max frequency of reports: in minutes and
communicates. This field cannot be edited.
default port is 7751. The port cannot be changed.
Wake-on-LAN (WOL) Relay.
seconds.
|
Configuring the Core Agent 85
Faronics Core User Guide