Core Agent Installer
The Core Agent Installer is used to install the Core Agent on the workstation. The Core Agent is
used to establish communication between the Core Console, Core Server and the Core Database.
This installer must be deployed to the workstations to be managed using Core Console.
Creating a Core Agent Installer
To create the Core Agent installer, complete the following steps:
1. Right-click on the Core Server connection node and select Create Core Agent Installer.
2. The Create Core Agent Installer dialog is displayed with the following options:
— Event Reporting Connection — This field displays the server to which the workstation
— Core Server Connection — This field displays the port on which the Core Agent listens. The
— Wake-on LAN Across Subnets — Select this check box if the workstation will act as a
— Network Traffic Management — Select the Max frequency of reports: in minutes and
3. Click OK. Browse to select a location for the file.
4. Click Save.
communicates. This field cannot be edited.
default port is 7751.
Wake-on-LAN (WOL) Relay.
seconds.
|
Core Agent Installer
49
Faronics Core User Guide