Deploying The Core Agent Manually On The Workstation (Attended Install) - FARONICS CORE Manual

Deploying the Core Agent Manually on the Workstation (Attended
Install)
Refer to the section
The Core Agent installer file can be deployed manually on the workstation by copying the Core
Agent installer .msi file from the folder where it was saved and executing it on the target
workstation(s).
Double-click the .msi file and click Next to continue the installation. The wizard will guide you
through the installation process. Repeat the process for each workstation that will be managed
with Core Console.
Alternatively, you can also use the command line as follows:
msiexec /i <Core_Agent.msi>
The Core Agent installer can also be deployed through Core Console. Refer to the
Core Agent from the Console

Deploying the Core Agent Manually on the Workstation (Attended Install)

Creating a Core Agent Installer
section for more information.
to create a Core Agent installer.
Faronics Core User Guide
|
65
Deploying the