Installing Deep Freeze; Attended Install Or Uninstall - FARONICS DEEP FREEZE ENTERPRISE 6 Manual

Installing Deep Freeze
After a customized installation program file has been created using the Configuration Administrator,
Deep Freeze can be deployed to workstations using an Attended Install, a Target Install, the Silent Install
System, or as part of an imaging process.
All background utilities and antivirus software should be disabled and all applications should be closed
prior to installation. These programs may interfere with the installation, which could result in Deep
Freeze not functioning correctly.
The workstation restarts after any type of installation is completed. Deep Freeze must be in a Thawed
state for any type of uninstall to succeed.
Any existing ThawSpace will be deleted during an uninstall if:
• the option to retain existing ThawSpace was not checked in the Configuration
Administrator
• the ThawSpace was not created with Deep Freeze Enterprise Version 5 or later
• the ThawSpace is on a Windows 95/98/Me workstation
Attended Install or Uninstall
To install or uninstall Deep Freeze, complete the following steps:
1. Run the installation program file (DF6Wks.exe) on the workstation.
The following screen appears.
2. Click Install to begin the installation. Follow the steps presented, then read and accept the
license agreement. Deep Freeze installs and the workstation restarts.
Click Uninstall to uninstall Deep Freeze. Uninstall can only be clicked if Deep Freeze has
previously been installed. If there is an existing ThawSpace, Deep Freeze displays a dialog
asking if it should be retained or deleted.