Pptp - D-Link DIR-605L User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password.

PPTP:

Select Dynamic (most common) or Static. Select Static if your ISP
assigned you the IP address, subnet mask, gateway, and DNS server
addresses.
PPTP IP Address: Enter the IP address (Static PPTP only).
PPTP Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static PPTP
only).
PPTP Gateway: Enter the Gateway IP Address provided by your ISP.
Primary DNS: The DNS server information will be supplied by your ISP (Internet
Service Provider.)
MAC Address: The default MAC Address is set to the WAN's physical interface MAC
address on the Broadband Router.
You can click the Copy.Your.PC's.MAC.Address button to copy the
Copy Your PC's
MAC address of the Ethernet adapter installed in your computer to
MAC Address:
the router.
Enter the Server IP provided by your ISP (optional).
PPTP Server IP:
User Name: Enter your PPTP account name.
Password: Enter your PPTP password and then retype the password in the
Confirm Password box.
Maximum Idle Enter a maximum idle time during which the Internet connection
Time: is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
MTU: Maximum Transmission Unit - You may need to change the MTU for
optimal performance.
Connection Mode Select a schedule or click Add.New to create a new one. Then select
either Manual or Connection.on.demand.
Select:
D-Link DIR-605L User Manual
PPTP
18