Mac Filtering - D-Link DIR-605L User Manual

Section 3 - Configuration
Use MAC Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network.
You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to
the Router.
Configure MAC
Select Turn.MAC.Filtering.OFF, Turn.MAC.Filtering.ON.and.
Filter:
ALLOW.computers.listed.to.access.the.network, or Turn.
MAC.Filtering.ON.and.DENY.computers.listed.to.access.
the.network.
MAC Address:
Enter the MAC address you would like to filter. To find the
MAC address on a computer, please refer to the Networking
Basics section in this manual.
DHCP Client
Select a DHCP client from the drop-down menu and click the
List:
<< button to populate the required fields.
Schedule:
The schedule of time when the network filter will be enabled.
The schedule may be set to Always, which will allow the
particular service to always be enabled. You can create your
own times by clicking.Add.New.
D-Link DIR-605L User Manual

MAC Filtering

34