D-Link DIR-605L User Manual page 12

Section 2 - Installation
3. Use the supplied Ethernet cable and plug it into the port labeled INTERNET on the back of the router. Plug the
other end of this cable into the Ethernet port on your modem.
4. Plug the power back into the modem and power it on. Then connect the supplied power adapter into the power
receptor on the back of the router and then plug into a power outlet or surge protector. Verify the power light
is lit.
5. If you are connecting to a Broadband service that uses a dynamic connection (not PPPoE), you may be online
already. Try opening a web browser and enter a web site. If you connect to a web site, you are finished with your
Internet setup. Please skip to page 14 to configure your router and use the manual setup procedure to configure
your network and wireless settings. If you did not connect to the Internet, use the Easy Setup Wizard (refer to the
next page).
D-Link DIR-605L User Manual
DIR-605L
4 3 LAN 2 1
Computer
DIR-605L
4 3 LAN 2 1
Computer
Modem
RESET
INTERNET 5V 1A
RESET
INTERNET 5V 1A
Modem
8