Lan Setup - D-Link DIR-605L User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router IP Address:
Enter the IP address of the router. The default IP
address is 192.168.0.1.
If you change the IP address, once you click Apply,
you will need to enter the new IP address in your
browser to get back into the configuration utility.
Subnet Mask:
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Local Domain
Enter the Domain name (Optional).
Name:
Enable DNS Relay:
Check the box to transfer the DNS server information
from your ISP to your computers. If unchecked, your
computers will use the router for a DNS server.
Refer to the next page for DHCP information.
D-Link DIR-605L User Manual

LAN Setup

27