Advertisement
Rack Mounting
Installing IPS-4260 in a 2-Post Rack
To rack mount IPS-4260 in a 2-post rack, follow these steps:
Attach the inner rail to each side of the chassis with three 8-32x1/4" SEMS screws.
Step 1
Using the four inner studs, install the mounting brackets to the outer rail with four 8-32 KEPS nuts. Insert
Step 2
four thread covers over the four outer studs on each side.
Install the two outer rail subassemblies in the rack using twelve 10-32x1/2" SEMS screws or whatever
Step 3
rack hardware is necessary.
Note
Installing Cisco Intrusion Prevention System Appliances and Modules 5.1
6-12
RES ET
C is co
ID
IP S 42
ID
NIC
POW ER
FLA SH
Int rus ion
STA TUS
Adjust the mounting brackets based on the rack-channel depth.
60 se ri
es
Pre ve nti
on Se ns
or
Chapter 6
Installing IPS-4260
OL-8677-01
Advertisement
