Chapter 3
Configuring the Domain Name Service
Specifying UDP Traffic on the DNS Server Port
Where to Go Next
OL-6037-01
By default, the CSS sets up flows using FCBs for DNS requests and responses.
For DNS UDP traffic on port 53, use the dnsflow command to determine whether
the CSS uses flow control blocks (FCBs) for DNS requests and responses. This
command provides the following options:
enable (default) - This command has been removed from the CLI. Use the
•
flow-state command instead. For details about the flow-state command, refer
to the Cisco Content Services Switch Content Load-Balancing Configuration
Guide.
disable - This command has been deprecated (obsoleted). This option maps
•
to the flow-state 53 udp flow-disable nat-enable command. For details
about the flow-state command, refer to the Cisco Content Services Switch
Content Load-Balancing Configuration Guide.
Chapter 4, Configuring Sticky
sticky using cookies.
Specifying UDP Traffic on the DNS Server Port
Cookies, provides information to configure CSS
Cisco Content Services Switch Getting Started Guide
3-3