Kurzweil PC2 - MUSICIANS GUIDE REV A Manual page 33

When the EQ button is on, Sliders AÐC control the values of the Low, Mid, and High parameters
that you see in the display. Slider D doesnÕt do anything in this case. If the EQ button is on, press
it to turn it off and return to Internal Voices mode. When the EQ button is off, the sliders work as
follows.
MIDI Setups Mode
In MIDI Setups mode, the four zone buttons activate and deactivate the zones in a setup. This
differs from turning the zones on and off, which is done with the MIDI Channel parameter in
the MIDI Xmit menu.
The tri-colored LED in each zone button indicates the zoneÕs status:
Off Empty zoneÑthat is, a zone that has its MIDI Channel parameter set to Off. When a
zoneÕs LED is off (unlit), the zone does not produce sound, even though it has a
program assigned to it.
Red Soloed zone. Only one zone can be soloed at a time. When a zone is soloed, only that
zone plays notes and generates controller information. Other zones, if theyÕre not
empty, still generate program changes and entry/exit controller values.
Green Active zone. As long as no other zone is soloed, an active zone plays notesÑ and
generates controller information, program changes, and entry/exit controller values.
If another zone is soloed, an active zone is ÒbackgroundedÓÑits status LED remains
green, but it doesnÕt play notes or generate controller information.
Orange Muted zone. Muted zones donÕt play notes or generate controller information, but
they do generate program changes and entry/exit controller values.
The following table shows how a zoneÕs status affects the data generated by the zone.
LED Color
Red
Green (no others are red)
Green (another is red)
Orange
(Off)
When youÕre in MIDI Setups mode, the bottom line in the display indicates the current zoneÑ
that is, the one that will be affected by any editing you do to the setup. In the following example,
Zone 1 is the current zone, as indicated by the numeral just to the left of the colon:
S002|Unison|Line|
A02|1:Big|Brass|
Zone
Status
Notes
Soloed
Active
Backgrounded
Muted
Empty
Performance Features
Data Generated by Zone
Program
Controllers
Changes
The Front Panel
Entry and
Exit Values
3-11