Kurzweil PC2 - MUSICIANS GUIDE REV A Manual page 115

Digital Output Width (DigOut Width)
Determines the size, in bits, of the digital ÒwordsÓ that the PC2 sends to the digital outs. Choose
between 16-bit, 18-bit, 20-bit, or 24-bit digital word lengths. Set this to match the input digital-
word-length conÞguration of your recording or processing equipment.
Digital Output Level (DigOut Level)
You can control the output level with the Master Volume Slider (a value of Slider), disable it
with a value of Off, or Þx it at any level from -79 dB to +24 dB.
Digital Output Shaping (DigOut Shaping)
By default, this parameterÕs value is On, which ÒshapesÓ the digital audio output, providing a
smoother noise ßoor. If youÕre sending the PC2Õs digital output to another digital device for
further processing, you may want to set the value of this parameter to Off, especially if the other
device applies its own shaping.
Available RAM (Mem Avail)
Not editable. Displays the amount of memory (RAM) available for storing user-deÞned objects.
Approximately 231 kilobytes for units with no user-deÞned objects.
PC2 Model
Not editable. IdentiÞes the instrument model: 76 indicates PC2; 88 indicates PC2X.
Keyboard Version (Ver)
Not editable. IdentiÞes the installed version of the keyboard.
Expansion Block 1 (EXP1)
Not editable. Indicates whether Expansion Sound Card 1 is properly installed (indicates a
problem if youÕve installed the card and the value is No).
Expansion Block 2 (EXP2)
Not editable. Indicates whether Expansion Sound Card 2 is properly installed (indicates a
problem if youÕve installed the card and the value is No).
Reset PC2?
Not a parameter but a prompt to execute a hard reset. Press Yes, and youÕll see a prompt asking
you if youÕre sure. The prompt prevents you from executing a hard reset inadvertently. A hard
reset erases all RAM, and restores all programs, setups, effects, and global parameters to their
original factory settings.
Dump all objects?
Not a parameter but a prompt to initiate a SysEx dump of all programs, setups, and effects.
Descriptions of Parameters
System Parameters
5-35