Advertisement
Quick Links
SENCOR
USER
MANUAL
UZIVATELSKÅ
PkiRUCKA
POU2iVATEL'SKÅ
PRiRUCKA
HASZNÅLATI
ÜTMUTATÖ
INSTRUKCJA
OBSLUGI
WEATHER
STATION
METEOROLOGICKÅ
STANICE
METEOROLOGICKÅ
STANICA SO ZMENOU FARIEB DISPLEJA
METEOROLÖGIAI
STACJA METEOROLOGICZNA ZE ZMIENNYM KOLOREM WYSWIETLACZA
sws
8800
WITH
COLOUR
CHANGE
DISPLAY
SE ZMÉNOU
BAREV
DISPLEJE
ÅLLOMÅS
SZiNVÅLTÖ
KIJELZÖVEL
Advertisement
Related Manuals for Sencor SWS 8800
Summary of Contents for Sencor SWS 8800
- Page 1 SENCOR 8800 USER MANUAL WEATHER STATION WITH COLOUR CHANGE DISPLAY UZIVATELSKÅ PkiRUCKA METEOROLOGICKÅ STANICE SE ZMÉNOU BAREV DISPLEJE POU2iVATEL'SKÅ PRiRUCKA METEOROLOGICKÅ STANICA SO ZMENOU FARIEB DISPLEJA HASZNÅLATI ÜTMUTATÖ METEOROLÖGIAI ÅLLOMÅS SZiNVÅLTÖ KIJELZÖVEL INSTRUKCJA OBSLUGI STACJA METEOROLOGICZNA ZE ZMIENNYM KOLOREM WYSWIETLACZA...
- Page 2 INTRODUCTION Thank you for selecting this delicate Iconic wireless weather station. Utmost care has gone into the design and manufacture of the clock. This manual is used for DCF / MSF version Please read the instructions carefully according to the version you purchased and keep the manual well for future reference OVERVIEW MAIN UNIT...
- Page 3 [ALARM 1 SNOOZE] key n normal mode, press and hold for 2 seconds to enter auto-cycle mode of When alarm is sounding, press to stop the current alarm and enter snooze. ndoor and CH 1—8of outdoor sensor's weather display. When alarm is sounding, press and hold for 2 seconds to stop the current In setting mode, press to increase the setting values alarm, the clock will sound again in the next day [MEM 1-1 key...
- Page 4 DISPLAY WIRELESS THERMO-HYGRO SENSOR WITH RCC RECEIVE FUNCTION Weather forecast section Transmission status 5. [CHANNEL] slide switch Time calendar section [RCC] receive key Assign the sensor to Channel In / Ch 1-8 humidity reading and icon section Press for RCC receiving or 8 In I Ch.
- Page 5 Assign the channel no (CH 1—8)for the wireless sensor by using channel WIRELESS SENSOR SIGNAL RECEIVING slide switch. 3 Insert 2 x AA size batteries into the battery compartment. Make sure you In normal mode, press [SENSOR] key to pair the sensor of current insert them the right way according to the polarity information marked on the displaying channel For example, when CH 1 is displayed, pressing [SENSORI...
- Page 6 Note: After replacing the batteries of the wireless sensor or the unit fails to receive wireless sensor signal of a specified channel, press [SENSOR] key to manually receive that sensor Signal again. 18m. VIEW INDOOR MULTIPLE WIRELESS SENSOR CHANNELS RECEPTION RADIO CONTROLLED SIGNAL...
- Page 7 Always place the unit away from interfering sources such as TV set, computer, etc Hour/Minute/setting Avoid placing the unit on or next to metal plate Closed area such as airport basement, tower block or factory is not Year setting recommended Do not start reception on a moving article such as vehicle or train DAYLIGHT SAVING...
- Page 8 c) By pressing and ho d [ALARM I SNOOZE] key for 2 seconds to stop the ALARM TIME SETTING DISPLAY alarm and will activate again in the next day 1 In normal time mode, press and hold [ALARM] key for 2 seconds until the d) By pressing [ALARM] key to stop the alarm and the alarm will activate again alarm hour digit flashes to enter alarm time setting mode in the next day...
- Page 9 Note: ICON Heat index is only ca culated when room temperature is between 26 500C, and based solely from the temperature and humidity measured from the indoor When the temperature Of the current channel or outdoor wireless sensors. is 30C or below, the flashing ice icon will appear in temperature section.
- Page 10 PAST HOURS HISTORY RECORD ALERT SETTING DISPLAY The unit can setup HI / LO temperature & humidity alert for indoor and up to The main unit will record past 24 hours weather data -C13H 8 outdoor channels of indoor and outdoor temperature & humidity records In normal mode, press and hold [ALERT] key for 2 seconds to enter alert automatically.
- Page 11 Temperature Level (Total 13 level) silence alert alarm When the alert is triggered, the alarm will sound and the alert icon & current reading Example on the display will flash Press [ALARM 1SNOOZE], [ALARM] or [ALERT] key to stop the alarm sound. If you ignore the alarm, it will stop after 2 minutes Note: You cannot enter conflicting HI / LO values in the setting For example, if the HI temperature alert value is 400C, you cannot enter more than 39 90C for...
- Page 12 15 1 -20 Green COLOURFUL BACKLIGHT DISPLAY 20.1 - 25 Yellow Slide [OFF I LO I HI] slide switch to [OFF] position to turn off the backlight (pressing [ALARM I SNOOZE] key to turn on the backlight for 5 seconds) 25.1 Light Orange Slide to [LOI position for the dimmer backlight.
- Page 13 Only use fresh batteries. Do not mix new and old batteries Note: Once the colour by temperature and humidity mode is on, Do not dispose old batteries as unsorted municipal waste. Collection of such icon wil shown on the display waste separately for special treatment is necessary Attention! Please dispose of used unit or batteries in an ecologically safe manner.
- Page 14 RF transmission range 30 meters that the radio equipment type SWS 8800 is in compliance with Directive Radio controlled signal DCF / MSF (depend on the country version) 2014/53/EU. The full text of the EU declaration of conformity is available...
- Page 15 • Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warrantu seal has been damaged). Authorized service centers Visit www.sencor.eu for detailed information about authorized service centers.
Need help?
Do you have a question about the SWS 8800 and is the answer not in the manual?
Questions and answers