Cleaning With Attachments - Bissell PROHEAT - MANUAL 3 User Manual

O
peration

Cleaning with attachments

your ProHeat 2X machine comes equipped with
a hose and at least one attachment for cleaning
stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags.
a. Check manufacturer's tag before
cleaning. "W" or "WS" on the tag
means you can use your ProHeat 2X. If
the tag is coded with an "X" or an "S"
(with a diagonal stripe through it), or
says "Dry Clean only", do not proceed
with any deep cleaning machine.
Do not use on velvet or silk. If
manufacturer's tag is missing or not
coded, check with your furniture dealer.
B. Check for colorfastness in an inconspicuous
place.
c. If possible, check upholstery stuffing.
Colored stuffing may bleed through fabric
when wet.
D. Plan activities to allow upholstery time to dry.
E. Vacuum thoroughly to pick up loose debris
and pet hair. Use a vacuum with a brush
attachment and a crevice tool to clean in
fabric folds.
2. Follow the instructions on page 9 for filling the
2-in-1 water tank and the formula tank.
3. Set ReadyTools dial to the tools setting. This will
allow spray and suction from the hose.
4. Set Custom Clean dial for heavy traffic,
normal clean or light clean as desired.
5. Attach the desired cleaning tool to the end of
the hose.
6. Plug in and turn the power switch and heater
switch (if desired) to the on ( I ) position.
7. Clean by pressing the spray trigger to spray
solution onto the area to be cleaned. Slowly
move the tool back and forth over the soiled
surface. Release the spray trigger to suction
soiled water. Continue to clean in the area,
working in small sections, until no more dirt can
be removed. Water rinse (optional) and suction
as needed.
caution: Do no overwet.
16 12
w w w . b i s s e l l . c o m w w w . b i s s e l l . c o m
Manufacturer's tag
WaRnInG:
To reduce the risk of
injury, be extra careful
when cleaning stairs.
Make sure machine is
secure and level.
5.