Bissell PROHEAT - MANUAL 3 User Manual page 11

O
peration
Carpet cleaning continued
7.
After cleaning, you may want to turn the Custom
Clean dial to water rinse to give your carpeting a
final water only rinse. This will ensure thorough
removal of embedded dirt loosened by the deep
cleaning formula. BISSELL deep cleaning formulas
contain an anti-resoiling agent that helps your car-
pets repel dirt and keeps them looking good longer.
8.
Remove the tank from the base of the machine
by lifting up on the tank carry handle. Carry like
a bucket to a utility sink or outside where you
will dispose of the dirty water.
8a. Unlatch the top of the tank from the bottom
by lifting up on the tank latch which is located
on the back of the tank.
8b. Remove the top of the tank by lifting up on
the handle.
note: Be sure to note how the lip on the
top tank separates from the groove in the
bottom tank. This placement is important
when putting the tank back together.
8c. Lift the bottom portion of the tank and pour out
dirty water toward the sink through the triangular
shaped opening in the corner of the tank.
note: you may notice hair and debris
deposits on the carpet or in the tank that
were loosened by the cleaning action
(especially with newer carpets that have
never been deep cleaned before). This debris
should be picked up and thrown away.
8d. Fill the heavy duty bladder with clean hand hot
tap water, following instructions on page 9.
note: Remember to secure the tank latch in
the back and test to make sure it is secure
before picking up the tank. always check
the level of cleaning formula in the formula
tank at the same time, and refill as needed.
9. Water rinse (optional). Rinsing is an optional
step that can be done during the cleaning
process by switching from one of the clean
settings on the Custom Clean dial to a water
rinse setting, or it can be done after the
carpeted area has been cleaned. Simply
choose the water rinse setting on the Custom
Clean dial and follow the same path as you did
for cleaning, taking care to do a forward (wet)
stroke by pressing the spray trigger, a
backward (wet) stroke, and a forward and
backward (dry) stroke, releasing the spray
trigger. Continue this until the water you see
coming up the nozzle is clear.
w w w . b i s s e l l . c o m w w w . b i s s e l l . c o m
WaRnInG:
To reduce the risk of fire and
electric shock due to internal
component damage, use only
BISSELL cleaning formulas
intended for use with the
deep cleaner.
Keep plenty of genuine BISSELL
advanced cleaning formula on hand so
you can clean and protect whenever
it fits your schedule. always use
genuine BISSELL cleaning formulas.
non-BISSELL cleaning formulas may
harm the machine and void the
warranty.
8.
8b.
8d.
8a.
8c.
9.
11 16 16