Power Cord Usage - Bissell 3950 User Manual

O
peration
crevice tool: Use in tight narrow spaces.
Extension Wand: Use with desired attachment for
a longer reach.
curved hose Wand: Use with desired attachment
for a longer reach or for cleaning hard to
reach places.
pet turbobrush
Use rotating brush action for cleaning and
removing pet hair from stairs, upholstery, area
rugs and other small areas.
1. Attach to the end of the hose or extension wand.
2. Pull toward you in a raking motion. Press gently
when using the Pet TurboBrush to gain maximum
cleaning. Too much pressure could damage the pet
hair grabbers or cause the brush to stop rotating.
notE: this tool is designed to remove pet
hair from upholstered or carpeted surfaces.
It should not be used on pets.

Power cord usage

1. To use your vacuum, remove the cord and plug
it into an electrical outlet. For your convenience,
there are two quick release cord wraps for easy
cord removal. There is also a cord clip that is
part of the upper cord wrap where you can
attach the cord when vacuuming.
2. When you are finished cleaning, turn
vacuum cleaner off.
3. Unplug power cord by grasping the plug (NOT
the cord) and disconnect from outlet.
4. Loop power cord around cord wraps on rear
of vacuum cleaner. Be sure to first return the
quick release cord wraps back to their
original position before wrapping the cord.
5. Clip molded plug to power cord to secure.
Quick Release
Cord Wrap
w w w . b i s s e l l . c o m
™ : (Select Models only)
notIcE:
for above floor cleaning, the floor
brush will continue to rotate but
is raised above floor. to prevent
carpet damage, do not lean on
the vacuum or let the powerfoot
tilt forward.
caUtIon:
the rotating floor brush
continues to rotate while
tools are in use. to reduce
the risk of injury from
moving parts, always
move the cleaner with the
carrying handle. always
place vacuum cleaner
on the floor with handle
in upright position when
using tools. never place
your fingers under the
cleaner when it is
running. never place
powerfoot on furniture or
uneven surfaces. Do not
place vacuum cleaner
close enough to objects
to pull them into the
rotating floor brush.
9