Handle Positions; Height Adjustment; Transporting Cleaner - Bissell 3950 User Manual

O
peration

Handle positions

press the handle release pedal, located on the
lower left side of the vacuum, with your foot to
place your vacuum into one of three cleaning
positions.
1. Upright – For storage and above floor
cleaning with tools.
2. normal cleaning – Press handle release
pedal once. Position used for most
household floor cleaning tasks.
3. low cleaning – With the vacuum in normal
cleaning position, press handle release pedal
again. Use for reaching under low furniture
such as tables, chairs or beds.

Height adjustment

the powerfoot/rotating floor brush on your
vacuum can be adjusted to clean several floor
surfaces
notE: for optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
1. Turn height adjustment knob to desired
setting.
bare floor
lowest Setting
Medium Setting For short and medium
highest Setting

Transporting cleaner

1. To move your cleaner from room to room,
put the handle in the upright position, tilt the
cleaner back on its rear wheels and push
forward.
2. The cleaner can also be moved by using the
carry handle.
w w w . b i s s e l l . c o m
For non-carpeted,
indoor surfaces
For short pile carpets
pile carpets
For plush pile carpet
1.
Tip:
Before cleaning under low furniture, check
area first for objects that might harm the unit
or block the vacuum hose.
2a.
2b.
right way to carry wrong way to carry
2.
3.
1.
7