Handle Positions - Bissell 82G7 SERIES User Manual

Handle positions
Press the handle release pedal,
located on the lower left side of the
vacuum, with your foot to place your
vacuum into one of three cleaning
positions.
1. Upright - For storage and above floor
cleaning with tools.
.
.
Normal Cleaning - Press handle
release pedal once. Position used for
most household floor cleaning tasks.
Low Cleaning - With the vacuum in
normal cleaning position, press handle
release pedal again. Use for reach-
ing under low furniture such as tables,
chairs or beds.
Hei_lht adjustment
There are seven height settings avail-
able for various floor surfaces. Turn
the dial on the foot of the cleaner to
the desired setting.
Lowest setting - For low pile carpet or
bare floors. To pick up debris it may
be necessary to move up one setting.
Medium settings - For medium pile
carpet.
High setting - For high pile and most
shag carpet.
Note: For optimal carpet cleaning
performance, adjust to the lowest
practical setting. If your cleaner is
difficult to pusl_, adjust to the next
higher setting.
If the dial is difficult to turn, tilt the
cleaner back slightly to take the
weight off the foot while turning.
Transportin_l cleaner
.
.
To move your cleaner from room to
room, put the handle in the upright
position, tilt the cleaner back on its rear
wheels and push forward.
The cleaner can also be moved by
using the carrying handle.
right way to carry
2.
wrong way to carry
www. b i s se II. co m _, 800.237.7691