Connecting To A Computer - Yamaha Clavinova CLP-430 Owner's Manual

Connecting to a computer

By connecting a computer to the USB [TO HOST] terminal, you can transfer data between the instrument
and the computer via MIDI, and take advantage of sophisticated computer music software.
1.
Turn off the power of the instrument before connecting a
USB cable.
2.
Turn on the power of the computer.
Quit any open application software on the computer.
3.
Connect the instrument and the computer via a USB cable.
Clavinova
4.
Turn on the power of the instrument.
When you connect the instrument to a computer for the first time, the
driver is installed automatically.
Operating System (OS)
Windows XP (SP3 or later), Windows Vista, Windows 7, Mac OS X Version
10.5–10.6.x
When data communication is unstable or some problem occurs even though
you've executed the above instructions, download the Yamaha Standard USB-
MIDI driver from the following URL then install it to your computer. For
instructions on installation, refer to the Install Guide included in the package
file.
http://music.yamaha.com/download/
For details about OS for Yamaha Standard USB-MIDI driver, visit the URL
above.
Advanced Functions
48
Connections
USB [TO HOST] terminal
USB cable
Computer
NOTE
• You can also use the MIDI IN/
OUT terminals to connect to a
computer. In this case, a MIDI
interface (such as the Yamaha
UX16) is needed. For more
information, refer to the owner's
manual of the MIDI interface.
• When a computer is connected
to the USB [TO HOST] terminal,
the MIDI IN/OUT terminals
cannot be used.
• For information on setting up
your sequence software, refer
to the owner's manual of the
relevant software.