Error messages
If one of the following message appears during scanning, perform the corresponding procedure.
Message
Unable to use scanner.
CANNOT USE SCANNER.
Unable to find destination PC. Check the PC.
CANNOT FIND DESTINATION PC. CHECK
THE PC.
Data capacity is over limit, unable to send e-
mail.
DATA CAPACITY IS OVER LIMIT. CANNOT
SEND E-MAIL
Destination Number is not registered. Enter
again.
DESTINATION No. WAS NOT REGISTERED.
ENTER AGAIN
Check to make sure that the network cable is
connected securely and properly. If this message
appears immediately after turning the scanner ON,
wait for awhile (approx. 2 minutes) while the scanner
warms up.
There is a problem at your computer. Check to make
sure that the Scanner File Utility is running and the
computer is able to receive data.
Reduce the number of pages being transmitted, or
lower the scanning resolution, and try to transmit
again.
The entered number is not appropriate. Check the
correct number and enter it again.
Page B-2
Procedure