Kyocera KM-1650 Operation Manual page 209

TWAIN Source
4 Color (Only available
in color scanners) ........... Lets you select, from among the following, the color designation of the image
5 Original Type
(Only available with
black and white
scanning) ........................ Lets you select, from among the following, the type of original that is actually
6 Resolution ..................... Lets you select, from among the following, the desired scanning resolution:
7 Scanning ........................ Lets you determine the scanning operation.
Auto: If you set the original to be scanned on the platen, that original will be scanned and the scanner
will wait for the next command. If you set the original(s) in the DF, the scanning operation will continue
until all of the set originals have been scanned.
Page: If you set the original(s) in the DF, only one (the first) original will be scanned.
8 2-sided .......................... Lets you select whether or not you want to scan both sides of the original
None: Only one side of the original will be scanned.
2 Sided: Both sides the original will be scanned.
2 Sided (Rotate):Both sides the original will be scanned, but the image on the back side will be rotated
180˚.
9 Status field ..................... Indicates the current status of the scanner.
to be scanned: color, Gray, ACS and Black & White.
being scanned: Photo, Text, Photo & Text and OCR
600 dpi, 400 dpi, 300 dpi and 200 dpi
when you set the original(s) in the DF.
Page 3-113