Kyocera KM-1650 Operation Manual page 248

Error Codes
Error
Cause of Error
Code
E033 The versions of the Scanner File Utility do
not match.
E034 Transmission was not possible because the
Scanner File Utility is communicating with
another scanner.
E035 During group transmission, the number of
the save folder registered in the Scanner
File Utility did not match.
E036 During compression of the scanned image
data, the data size went over the maximum
limit.
Check the versions of the Scanner File Utility
software.
Try to perform the operation again after the
connection to the other scanner is completed.
Check the Scanner File Utility settings.
Perform any or all of the following procedures
in order to lower the amount of data and then
try the scanning and transmission operation
again.
• Lower the designated resolution of the image
data.
• Change the image quality mode setting to
"OCR".
• Lower the number of documents(pages) that
are being scanned at one time.
Page A-4
Procedure for Correction