Electromagnetic Compatibility (Usa); Electromagnetic Compatibility (Canada); Electromagnetic Compatibility (Eu); Safety - Fujitsu XG2000C - Switch Hardware Manual

Hardware guide
Table of Contents

Advertisement

Electromagnetic compatibility (USA)

FCC PART 15B (2005) Class A
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates uses, and can radiate radio frequency
energy and. If not installed and used in accordance with the instrucrtion manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

Electromagnetic compatibility (CANADA)

Industry Canada Interference-Causing Equipment Standard ICES-003 Class A.
This Class A digital appartatus compies with Canedian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Electromagnetic compatibility (EU)

EN55022(2006) Class A
EN61000-3-2(2000)
EN61000-3-3(1995)+A1(2001)
EN55024(1998) + A1(2001) + A2(2003)
Warning
This is a product which meets Class A of EN55022. In a domestic environment this product may
cause raido interference in which case the user may be required to take adequate meausers.

Safety

CAN/CSA C22.2 No. 60950-1, UL60950-1 and EN60950-1

Static electricity

Under certain conditions, twisted pair cables can become charged with static electricity. Con-
necting a statically charged twisted pair cable to a device can cause the device or its LAN
port to operate falsely or to become damaged.
Use a static removal tool to discharge twisted pair cables to ground immediately before con-
necting them to devices.
Note that a discharged twisted pair cable that has been left unconnected for a long time may
become statically charged again.
6
For Safe Use of the XG2000C

Advertisement

Table of Contents
loading

Table of Contents