Disconnecting The Recorder From Your Computer - Yamaha PocketrakCX - POCKETRAK CX 2 GB Digital Player Reference Manual

Once the recorder is recognized by the computer, the following display appears
on the screen.
Precautions when using the USB terminal
Be sure to observe the following points when connecting the recorder to a computer's USB
interface.
If you do not observe these points, you risk freezing the computer, corrupting the data, and
losing the data. If the computer or the recorder freezes, restart the operating system or appli-
cation software such as Windows Media Player.
IMPORTANT
• Never disconnect the USB cable while data is being transferred.
• Be sure to wake the computer from sleep/suspended/standby mode before making a connec-
tion to the computer's USB terminal.
• Quit all applications running on the computer before connecting or disconnecting the USB
cable.

Disconnecting the recorder from your computer

■
Windows:
1.
Click
bottom right of the Windows
screen, then click [Safely remove
USB Mass Storage Device].
2.
After the computer displays the
message shown on the right,
remove the USB cable.
■
Macintosh:
1.
Drag and drop the drive icon ("NO NAME") of the recorder on the desktop
to the Trash Can.
2.
After the drive icon ("NO NAME") disappears from the desktop, remove the
USB cable.
POCKETRAK CX Reference Manual
Connected to PC
on the taskbar at the
Using the POCKETRAK CX with a Computer
Transmitting to/
from PC
55