Yamaha PocketrakCX - POCKETRAK CX 2 GB Digital Player Reference Manual page 77

When the unit is connected to the computer, the unit does not display the "Connected" icon.
Possible cause
Corrective action
The recorded audio sounds noisy.
Possible cause
Corrective action
The recorded sound is distorted.
Possible cause
Corrective action
The recorded sound skips.
Possible cause
Corrective action
The date and time are displayed incorrectly.
Corrective action
Deleting files does not increase the amount of free space.
Possible cause
Corrective action
POCKETRAK CX Reference Manual
The unit is not connected to the computer correctly.
In some cases, the unit may not display the "Connected" icon or may not
be recognized when it is connected to a computer. Disconnect the unit
from the computer, then reconnect it.
Wind noise has been recorded.
The built-in stereo microphone is highly sensitive. Therefore, a slight
breeze or breath — even a weak air conditioning breeze that hits the
microphones directly — will be recorded as noise. To reduce the level of
wind and other environmental noise:
• Use the recorder with the wind screen (protection against wind and sib-
ilance) attached to the built-in stereo microphones.
• Turn on the High Pass Filter via menu item [HPF] (see
• Set the [MIC SENS] (microphone sensitivity) switch to [LOW].
The microphone sensitivity level may not be appropriately set.
• Set the [MIC SENS] (microphone sensitivity) switch to [LOW]. If you still
hear distortion, set the High Pass Filter to ON and attach the wind-
screen to the recorder (see
• If the ALC function is turned off, set the recording peak limiter to ON
(see page 21).
• The microSD card was formatted not on the recorder, but on a com-
puter or other device.
• The microSD card may be fragmented significantly.
Use the recorder to format the microSD card (see
Set the correct date and time (see
The Recycle Bin function is turned on.
Empty the Recycle Bin (see
page 21).
page 9).
page 44).
Appendix
page 21).
page 46).
77