Loading Audio Files; Disconnecting The Recorder From Your Computer - Yamaha POCKETRAK C24 Owner's Manual

Loading audio files

Windows:
1.
Connect the recorder to the computer.
2.
Open [My Computer] from the [start] menu.
3.
Double-click [PRC24] or [PRC24SD].
4.
Double-click the folder that contains the file that you wish to load to your computer.
5.
Copy the file to the desired location on the computer.
Macintosh:
1.
Connect the recorder to the computer.
2.
Double-click the drive icon [PRC24] or [PRC24SD] of the recorder that appears on the desk-
top.
3.
Double-click the folder that contains the file that you wish to load to your computer.
4.
Copy the file to the desired location on the computer.
Transferring audio files from the computer to the recorder
In Step 4 (for Windows) or Step 3 (for Macintosh), drag and drop the audio files that you
wish to transfer (such as MP3 files or WMA files) into the [MUSIC] folder. The MUSIC (M)
folder stores music and other audio files transferred from a connected computer.
Before transferring audio files to the MIC (A–D) folders or LINE (L) folder, rename the files
following the file naming rules (see page 13). The unit will not play files that do not comply
with the file naming rules, unless they are in the MUSIC (M) folder.

Disconnecting the recorder from your computer

Windows:
1.
Click " " on the taskbar at the bottom
right on the Windows screen, then click
[Safely remove USB Mass Storage Device].
2.
After the computer displays the message
shown on the right, disconnect the USB
plug.
Macintosh:
1.
Drag and drop the drive icon [PRC24] or [PRC24SD] of the recorder on the desktop into the
Trash Can.
2.
After the drive icon [PRC24] or [PRC24SD] disappears from the desktop, disconnect the USB
plug.
Using the Recorder with a Computer
POCKETRAK C24 Owner's Manual
31