Programming The Alarm - Yamaha PocketrakCX - POCKETRAK CX 2 GB Digital Player Reference Manual

6.
Press the [STOP/ESC
The recorder displays the main screen.
Note:
· The crossed-out timer indicator (
one of the following reasons:
- There is no available recording time.
- The specified folder contains 199 files.
- The unit is currently playing back.
- The unit is currently recording.
- You are currently setting menu items.
· To remove the timer indicator (
· Timer recording will be cancelled once the programmed Timer recording has been exe-
cuted.
· You cannot program Timer recording if the alarm has already been programmed, and
vice versa.
■
Canceling Timer recording
Select [CANCEL] as in step 2 of the "Programming Timer
recording" procedure, then press the [MENU/ENTER]
button.

Programming the alarm

If you program the alarm, it will sound at the specified time. You can specify your favorite song as
the alarm sound instead of a beep. Before you proceed, make sure that the date and time on the
unit have been set correctly (see
1.
Press the [MENU/ENTER] button for at least two
(2) seconds while the main screen is displayed,
press the [VOL +/-] buttons to select [COMMON
MENU] → [TIMER & ALARM], then press the
[MENU/ENTER] button.
2.
Press the [VOL +/-] buttons to select [ALARM],
then press the [MENU/ENTER] button.
The recorder displays the alarm indicator.
POCKETRAK CX Reference Manual
] button twice.
) means that Timer recording is unavailable due to
), cancel the programmed Timer recording.
page 9).
Using the Timer Functions
Alarm indicator
48